Americas Funniest Home Videos: Lights! Camera! InterAction!
Thank you for purchasing this program. In this file we have gathered the text from all the on-screen help in one place. We hope this will help you install and enjoy this product. We want to remind you that this is a CD-ROM, consequently you may find some sections of the program taking 8 to 12 seconds to load. This is so the final playback will be as smooth as possible. Please be patient during the load times. Nothing is broken; that's just the state of today's technology.
System Requirements:
Windows¿ 3.1, 3.11 and Windows¿ 95:
Ñ 486SX-25MHz or faster
Ñ 8 MB RAM
Ñ Microsoft Windows 3.1, 3.1.1 and Windows¿ 95 compatible
Ñ 256 colors (thousands of colors STRONGLY recommended - Run the Lights! Camera! InterAction!-16 if you have thousands of colors capability)
Ñ Power Macintosh: 12 MB RAM with Virtual Memory Turned On
Ñ Macintosh: 8 MB RAM with Virtual Memory Turned Off
Ñ System 7.01 or higher
Ñ 3 MB available hard disk space
Ñ Double speed CD-ROM drive or faster
Ñ Modem (optional)
Graphix Zone, Inc. License Agreement
This is a Legal Agreement between you as an end user and Graphix Zone, Inc. concerning this product, hereafter referred to as Software. By clicking the button labeled "OK" during the installation, you agree to be bound by the terms of this agreement.
1. License. This agreement permits you to install and use your copy of the Software on single computer. You may not network the Software or otherwise use it or install it on more than one computer or terminal at the same time.
2. Copyright. The Software (including any images, text, photographs, animation, video, audio, and music) is owned by Graphix Zone, Inc. or its suppliers and is protected by United States copyright laws and its international treaty provisions. You may either (a) make one copy of the Software for backup or archival purposes, or (b) transfer the Software to a single hard disk, provided that you keep the original for backup or archival purposes. Otherwise, the Software may not be copied or reproduced for any other purpose.
3. Other Restrictions. You may not rent or lease the Software. You may transfer the Software on a permanent basis, provided that you retain no copies and the recipient agrees with the terms of this Agreement. You may not reverse engineer, decompile, or disassemble the Software, except to the extent that the foregoing restriction is expressly prohibited by applicable law.
4. Limited Warranty. Graphix Zone warrants that the Software will perform substantially in accordance with the accompanying printed materials for a period of ninety (90) days from the date of purchase. Graphix Zone's entire liability and your exclusive remedy shall be limited only to replacement of the Software that is determined to be defective during the warranty period, and is returned to Graphix Zone with a copy of your receipt. This Limited Warranty is void if the defective Software resulted from accident, abuse, or misapplication. Any replacement Software will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer.
5. No Other Warranties. To the maximum extent permitted by applicable law, Graphix Zone disclaims all other warranties, either express or implied, including but not limited to implied warranties of merchantability and fitness for a particular purpose, with respect to the Software. This limited warranty gives you no specific legal rights. You may have others, which vary from state/jurisdiction to state/jurisdiction.
6. No Liability For Consequential Damages. To the maximum permitted by applicable law, in no event shall Graphix Zone or its suppliers be liable for any damages what so ever (including, without limitation, damages for loss of business interruption, loss of business information, or other pecuniary loss) arising out of the use or inability to use this Software, even if Graphix Zone has been advised of the possibility of such damages. Because some states/jurisdictions do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you.
Graphix Zone, Inc. 42 Corporate Park, Irvine, CA 92714
Installation
How To Install for Windows:
Important: Let╘s make sure your system has what it takes. Please review the system requirements listed on the back of your CD-ROM case or earlier in this file.
We╘ll assume that you╘re slightly acquainted with Windows. If not, please refer to your Windows user guide to clarify these standard steps.
1. Start your computer and go to the Windows¿ 3.1 Program Manager or Windows¿ 95 Desktop Taskbar
2. Put your new CD-ROM into the CD-ROM drive.
3. In Windows 3.1, open the File menu, then choose Run. In Windows¿ 95, click on the Start button,
then choose Run.
4. Type the following: [drive]\setup where [drive] is replaced by the letter for your CD-ROM drive. For example, if d is the letter for your CD-ROM drive, you would type: d:\setup and then press the Enter key.
5. Follow the instructions that appear on your screen.
Everything needed to run Lights! Camera! InterAction! will install automatically on your hard drive or is contained on the CD-ROM itself. In Windows 3.1, you╘ll see a new Program Group called America's Funniest Home Videos on your screen. Windows¿ 95 will create a new entry in your Programs list, accessed from your Start button. Inside you╘ll see a Lights! Camera! InterAction! icon, a Read Me icon and a Register icon.
How To Install for Macintosh¿ and Power Macintosh¿:
We'll assume that your system meets the listed system requirements listed at the beginning of this file. Please review them, then follow these directions:
1. Insert the CD into the CD-ROM drive.
2. Double-click the Installer icon located on the CD.
3. Follow the installation directions.
4. After installation, your Macintosh will reboot. This is normal, because your Quick Time files have been upgraded.
This set-up program automatically creates a folder and installs the appropriate files to run Lights! Camera! InterAction! on your hard drive.
How To Start : Once installation is complete, double-click on the Lights! Camera! InterAction! icon in the AFHV CD-ROM folder on your screen. There are 2 icons: one for an 8 bit (256 color) version and a 16 bit (65,000 color) version. Most Macintosh video cards can support the 16 bit version. We suggest you try this first, because the program will look better and run smoother at greater than 256 colors.
Electronic Registration:
Ñ We╘ve made it fast and easy for you to register your CD-ROM. It╘s called E-Reg (for Electronic Registration) and you╘ll see it on your screen right after you install the disc.
Ñ When you register, we╘ll keep you informed about upgrades and special offers on new Graphix Zone CD-ROMs only available to registered users.
Ñ And, if you ever need technical help, we╘ll be able to give it to you better and faster -- because we╘ll already know about your computer before you call us.
E-Reg automatically appears on the screen right after you install. If you choose not to register during installation, you may register or view your personal registration information at any time by double-clicking on the Register icon in the Program Group (PC) or on the disc (Mac)..
Ñ If you live in the USA, you can modem your completed E-Reg to us toll-free by selecting that option.
Ñ Or, print out your completed E-Reg and fax it to us at 714 833 3894.
Ñ Or, mail it to us at: Graphix Zone E-Reg, 42 Corporate Park, Ste. 200, Irvine, CA 92714 USA
Ñ Or, register by telephone. Call us toll-free at 800 828 3838, extension 201, press 1 when prompted, then follow the recorded instructions.
Technical Support:
If you have any problem installing or using Lights! Camera! InterAction!, please call our Technical Support Department at 714 833 3570. Our hours are Monday through Friday, 8:00 a.m. to 5:00 p.m., Pacific Standard Time. Or visit our web site http://www.gzone.com .
A valuable and interactive world awaits you...on CompuServe.
Access world news and sports wires, popular magazines, travel reservations systems, basic stock quotes, a reference library, electronic shopping, games, entertainment reviews and much more!
Sign On Now -- In 3 Easy Steps:
Step 1 - Install Lights! Camera! InterAction! and choose to install CompuServe.
On Windows machines, the install program will begin the installation process automatically. You can choose to continue or cancel.
On Macintosh machines, you must wait until the AFHV install is done and your Mac has rebooted. Then go to the CSERVE directory on the AFHV CD-ROM and double-click on the CompuServe Installer.
We suggest that you choose to at least install the software now if there is a chance you want to use the online features of the disc. If you already have an active online account with CompuServe then you may still want to install the software, because this is the very latest version and you may enjoy some new features. Don't worry, all your settings and addresses will be retained if you upgrade.
Step 2 - Make sure your modem is set up and turned on when you choose to go online. You can access CompuServe directly from the disc, but you must have installed the CompuServe software and have become a member either with our FREE trial software or with your own account.
Step 3 - When prompted, enter the agreement number and serial number found below to begin your FREE trial membership:
Agreement #: GZHOMEVID
Serial #: 101050510
Using CompuServe from within the program: If you choose to use the online features of this disc after you have installed the disc, but do not have CompuServe software installed yet, you will need to follow several steps which may be confusing. To install the CompuServe files, please exit the program and go to the folder on the AFHV CD-ROM named CSERVE. In that folder, click on SETUP.EXE for Windows, or CompuServe Installer for Macintosh. This program will copy the files to your hard disk. If you are not already a CompuServe member, you should run the Signup program when prompted. Be sure to have the Agreement Number and Serial Number found above. This will allow you you sign up for the free trial membership.
Tips for sending your creations online: This disc allows you to send the script or "DNA" of your best masterpiece to friends who also have the disc. You can even upload them to the AFHV area on CompuServe to share with others and may download their masterpieces. Though e-mailing, uploading and downloading are relatively easy to learn, the steps are quite different for Mac users and PC users. DNA scripts, which can play back ClipSets, are very small (only 22 bytes) and you can send them on floppy discs to friends who also own this CD-ROM. You can also post them on the America's Funniest Home Videos forum on CompuServe.
Windows: When the Forum opens, you'll see buttons on the right side of the screen, one of which looks like a floppy disc with an arrow attached. Click on that. A dialog box opens called Library Contribute. You need to fill in all the empty fields before you can send a file. First, choose to send the file to the AFHV Goes CD-ROM Library Section. Then make sure the file type is Binary. Click on the button labeled File name. When the dialog box opens, direct it to the AFHV folder on your hard drive. Choose the DNA file you want to send and click OK. Under Destination Name, you could create a different name for your file, but we recommend you leave it in the 8.3 character format for maximum compatability across platforms. You can, however, give your file any Title you want, as well as type in a longer description of your file. Keywords can be anything which you think a file search would look for, like DNA or a Story Name like "Psychiatrist's Office". When all fields are filled in, click on OK to send your file up to the Forum. You can click on the Help button in the Library Contribute dialog box for excellent online help.
Macintosh: When the Forum opens, go to the Menu Bar and click on Libraries, and drag down to Contribute File. A dialog box opens asking for the File name. Direct it to the AFHV folder on your hard drive. Choose the DNA file you want to send and click Select. A dialog box opens called Library Contribute. Under Host Name, you could create a different name for your file, but we recommend you leave it in the 8.3 character format for maximum compatability across platforms. You need to fill in all the empty fields before you can send a file. First, choose to send the file to the AFHV Goes CD-ROM Library Section. Then make sure the file type is Binary (not MacBinary). You can give your file any Title you want as well as type in a longer Description of your file. Keywords can be anything which you think a file search would look for, like DNA or a Story Name like "Psychiatrist's Office". When all fields are filled in, click on Contribute to send your file up to the Forum. For online help, you can click on the ? button in the upper right corner of the dialog box
For help with CompuServe, call Customer Service at 1-800-848-8990.
Use of CompuServe requires a major credit card or checking account. Users outside the United States pay an additional per minute surcharge at all times, including trial time. Additional phone charges may apply. Your free trial must be used within 30 days of your initial sign-on. Limit one free trial per household. ⌐1995 CompuServe Incorporated. An H & R Block Company.
Using the Program
At the Main Menu (the House)
Attic Window
Click here to go to the Interactive Attic, the easiest and quickest way to have fun with the Video Clips. Click on objects stored there to choose fun stories, where you fill in the blanks with funny video segments.
Second Floor
Click here to visit the Editing Room, where you can get creative and take more control of editing your funny stories. You have lots of options, but it takes a little more time and effort.
First Floor Window
Want to just be a Couch Potato? Click here to go to the Living Room and view all the Video Clips by name. You can search for specific topics using keywords in the Program Guide to narrow your search.
Front Door
Click here for in-depth help with any of the areas.
Telephone Pole
Click here to go "online", where you can launch CompuServe, to send and receive funny scripts along with other fans of America's Funniest Home Videos.
Road
Click here when you want to "hit the road" and exit the program.
In the Attic
Each of the objects in the Attic represents a story. If the cursor changes to a pointing finger when it passes over an object, you can click on that object and go to the game board, where you can add video clips to that particular story. There are 3 objects which just play pre-selected clips for your enjoyment: the Christmas Ornaments, the American Flag and the Pinata. To get more help, click on the first aid kit. To exit, click on the window.
At the Game Board
When you reach the game board, here's what you do:
Each of the stories has a certain number of slots to be filled with video clips. On this game strip, the marker will jump forward and leave a logo in a space when you have selected a video clip from the game card. This means a slot has been filled. When the marker reaches the end you have filled all the slots and the story is ready to be seen. The number of slots in a story varies from 3 to 8.
The Game Card
To fill a video slot in a story, you have six video clips from which to choose. The video names appear on this card. When you select one of the six, the marker will move forward and a new set of selections will appear on the card. You keep selecting until all the spaces are filled. You may click on ╥Surprise Me╙ at any time and we will make all or the remaining selections for you. When all the slots in the story have been filled, you will hear a sound and this card changes to a ╥Play╙ button.
The Story Card
This shows the story you have chosen from the Attic icons. The video clips you select will fill in the video slots in the story depicted on the story card.
Help Card
When you are at the Game Board, you can access the help screen at any time by clicking on the Help Card.
Attic Card
You can return to the attic by clicking on this card. In the attic you can select another story or exit the program.
Open Card
By clicking on the Open Card, you can access a specific series of video clips which you have saved. When a saved series of video clips for a story is opened, the story can be played and those specific videos will fill the video slots.
In the Editing Room
We recommend that you explore the attic and the Game Board areas before you begin the editing process. This will allow you to become familiar with the way the stories are constructed.
Story Menu
This is where you choose a story you wish to edit. Editing a story means that you choose video clips to fill an open slot in the story.
When you click on a story in the menu, a picture representing that story will appear in the box. That is the story you will be editing. To choose a different story, simply click on another title in the menu.
Open Slots In the Story
When you select the story you wish to edit, the number of open video slots needed to be filled in the story will appear here. To select a open slot to fill, click on the slot number or the button below it. The number will turn yellow which means the slot is ready to be filled by a video clip you select. Also, when you click on a number, you will hear a ╥set-up╙ line. This is the line in the story which precedes the video clip. Use this to help you make your most creative decisions. You can preview the video clips in the Video Name Menu.
Video Name Menu
After you have chosen a video slot number to be filled, this is where you select video clips to preview for possible use in the story. You can scroll through over 450 clips or do a search by a keyword from a menu which will narrow down your choices. When you click on a video name in the small blue screen, the video will play in the Preview Screen in the upper right.
Preview Screen
When you have selected a video clip to preview, it plays in this screen. You can control the viewing of the clip by using the PLAY, REWIND (REW) and STOP buttons. The name of the video clip will appear in the space below (e.g. Adventure Movie). At any time you may select another video to preview from the Video Name Menu.
When you feel the video clip will creatively fill the selected, open slot; click on the Record Button.
Record (Rec) Button
Clicking the Record Button (REC) fills the open slot in the story with the video clip which is in the Preview Screen .When a slot is filled the number changes to solid blue and the next slot is ready to be filled . Now you can go back to the Video Name Menu and select other videos clips to preview for the next open slot.
Run Button
When you have filled all the open video slots in a story, you can view the edited story by clicking on this button.
Open Button
If you have saved a set of video clip selections for a particular story, you can open the saved file by clicking on this button. You will then be able to play the story with those selections filling the slots.
Exit Button
To go back to the main menu (the house) click on the exit button.
In the Living Room
Today╘s Topics
This is a list of keywords to help you narrow your choice of video clips to play. You can select All, which will display a list of over 450 video clip names in the Programs Menu; or you can search by the categories we have created (e.g. Weddings). Most video clips will appear in more than one category.
Programs Menu
After selecting a keyword from the Today╘s Topics Menu, the Programs Menu displays a list of video clips available to be played. You can play a video clip by clicking on its name in this menu. A scroll bar is availbale to search through the list.
Television
The selected videos will play in this screen
Remote Control
Here you can control the playback of the video clip. Clicking on the Green button will replay the video. Clicking on the Red button will stop the video. Clicking on the Blue button will rewind the video.
To exit to the main menu (The House) click on Exit. To review these instructions at any time click on Help.
Saving and Opening DNA Scripts
Save
To save a DNA ClipSet file which will replay a story you have created, click on the Save button in the screen which comes up right after you play your story.
A standard dialog box will open, asking you to name your file. We give the files a default extension of ".dna" on the PC, leaving 8 characters for a name. Macintosh users don't have to use this "8.3" naming, but you should if you want to send a DNA ClipSet file to a friend with a PC.
The default location to save your file is the AFHV folder we created on your Hard Disk. You can save to a floppy, if you like, by changing the drive name in the Save dialog box.
After you type the file name and desired drive destinaton, click on OK
Open
You can open a saved DNA ClipSet from 2 locations: the Open card on the Game Board or the Open button in the Editing Room.
A standard dialog box will open, with ".dna" files in the AFHV folder as the default choice. Select the one you want to open, and it will be loaded into either the Editing Room or Game Board, depending on where you are. You can then play it immediately. You can make changes to it in the Editing Room by selecting Change, then selecting the space you want to change.
Miscellaneous Technical Tips
CD-ROM playback speed is very important to smooth video playback. On Windows machines, to check your CD-ROM transfer rate, open the QTW.INI file in your Windows directory. If you have instaled the version of Quick Time on this disc, it has tested your drive and entered the results in the [Data Handler] section of the QTW.INI file. If Xfer Rate is less than 300, your drive is not performing at Double Speed and the video playback may be choppy.
Hitting the M key at any time will take you back to the Main (House) Menu. You can also jump to the Main Menu during the opening video by clicking on the screen.
We strongly recommend you set your monitor to thousands of colors. Everything will look better and play more smoothly.
